
Add to Cart
rock wool metal stick pins are easily install any type of insulation up to 3.5" thick to air ducts, metal buildings, concrete foundations - even to the underside of wooden roofs. Insulation Hangers are perfect for installing fiberglass or rubber insulation blankets or polystyrene board. Insulation Hangers have a sticker backing to make placing easier. They also have a unique Easy-Peel adhesive backing design so that there isn't any
fumbling with the release paper.
tape base | base thickness | pin diameter | pin length | material |
50x50mm | 1mm | 12ga/3mm | 38mm-280mm | mild steel / stainless steel |
accept custom |
| accept custom | accept custom | mild steel / stainless steel |
1.speration Temperatures: 15 to 25 ℃
2.Working Surface should be clean and dry, free of dust, grease, oil and any other loose matter.
3.Insulation can be impaled immediately and firmly locked with fastening washer.
4.The Maximum strength of adhesive is achieved after 24 hours
Insulation Fixing Pins is with high penetration strength with all types of thermal insulation boards, suitable for brick and conrete walls.
· ROUND TYPE SELF LOCKING WASHERS
· SQUARE TYPE SELF LOCKING WASHERS
· METAL DOME CAP WASHERS
· SPEED CLIPS WITH PLASTIC COVER
PIN LENGTH | CARTON SIZE | QTY/CARTON |
38MM | 41CMX28CMX17CM | 1000PCS |
50MM-65MM | 41CMX28CMX17CM | 500PCS |
70MM-84MM | 30CMX28CMX29CM | 500PCS |
90MM-120MM | 30CMX30CMX30CM | 500PCS |
130MM-160MM | 30CMX30CMX35CM | 500PCS |
170MM-203MM | 30CMX30CMX28CM | 250PCS |
OTHERS | SUPPORT CUSTOM |