Huihao Hardware Mesh Product Limited
Huihao Hardware Mesh Product Limited- Admin@huihaomesh.com pattern design, frame design, color finished and installation parts Insulation pins- Fabric Lamianted glass- Mesh Drapery - Architectural
Add to Cart
Bonding fasteners provide a solid metal anchor point on even difficult shaped structures made from a variety of different materials including
plastic, carbon fibre and fixing points for GRP (Glass Reinforced Plastic) products, but have found a host of other uses where conventional
fasteners cannot meet the requirements. They can be bonded into the substrate or alternatively can be surface-mounted to most materials
by means of adhesives or mechanical fasteners such as screws, rivets or nails. Each part consists of a Stud or Female Thread welded to a
perforated Base Plate.
| base shape | base size | base thickness | stud size | stud length |
| round | 20mm, 23mm, 38mm,50mm,76mm | 1.2mm | m4-m10 | to be your request |
| square | 15mm, 30mm, 32mm, 50mm | 1.2mm | m4-m12 | to be your request |
| Rectangular | 24x11.5mm, 38mmx15mm, 40x10mm, 50x15mm | 1.2mm | m4-m12 | to be your request |
| Prepare the panel surface by cleaning thoroughly with IPA | Ensuring the adhesive is fully mixed, dispense sufficient adhesive for the application | Locate the Master-Plate fastener over the adhesive |
| Firmly press the Master-Plate fastener into the adhesive until adhesive flows through the holes in the base plate | Following the adhesive manufacturers instructions, allow sufficient curing time | Once the adhesive is fully cured, the Master-Plate fastener is ready for use |
We can also carry out fastener and panel material testing. Depending on the type, testing is carried out in-house or at an independent
accredited laboratory.
•Material chemical analysis
•Plated finish analysis
•Coating thickness
•Salt spray testing
•Hardness testing
•Case hardness depth
•Tensile testing
For difficult applications or situations where access is tight, we can work with you to develop a custom installation tooling solution for our
Primaserter Fastener Installation Press. If you use a Haeger Fastener Installation Press we can put you in touch with a Haeger Service
Engineer to discuss your requirements and find a solution.Give us a call to discuss your requirements and we’ll recommend the right fastener
for the job and the installation options available