Huihao Hardware Mesh Product Limited
Huihao Hardware Mesh Product Limited- Admin@huihaomesh.com pattern design, frame design, color finished and installation parts Insulation pins- Fabric Lamianted glass- Mesh Drapery - Architectural
Add to Cart
Insulation fixing anchors is a special engineering plastic expansion wall plugs that fixes the insulation board to the wall. Insulation fixing anchors
are special anchors for exterior wall insulation, which are widely used in building decoration and anchoring of wall insulation houses. It consists
of galvanized screws, nylon risers and fixed discs. According to the thickness of the insulation layer, it is divided into various specifications.
Material: It is made of the nylon material, durable and well designed for holding items firmly on the wall.The head of the screw is
countersunk head.The screw is steel made and yellow zinc plated.The length of the screw is standard.The plug is made of the gray nylon.
Structure: Geometry of the expansion pipe, in the solid structure of the object in the expansion.
Color:Most grey and white, other colors are also available.
Function: To prevent rotation of the structral design, when using the screw does not rotate in the air to follow.
Feature:Elasticity, shock resisting, durable, light weight, easy installation, resistance to corrosion
types of plastic insulation fixing anchor/anchor wall plugs
Conjoined: 8×62, 8×82, 8×102, 8×122, 8×142, 10×162.
Split: 10×162, 10×182, 10×202, 10×252, 10×302, 10×352, 10×402, 10×452, 10×502, 10×552, 10×602
Anchors wall plugs data sheet
| Pin Size | Pin Dia | Pin Length | Washer dia | Packaging |
| M8x50 | 8mm | 50mm | 45mm-60mm,could be customized | 1000pcs / carton |
| M8x60 | 8mm | 60mm | 45mm-60mm,could be customized | 1000pcs / carton |
| M8x90 | 8mm | 90mm | 45mm-60mm,could be customized | 1000pcs / carton |
| M8x110 | 8mm | 110mm | 45mm-60mm,could be customized | 1000pcs / carton |
| M8x140 | 8mm | 140mm | 45mm-60mm,could be customized | 1000pcs / carton |
| M10x160 | 8mm | 160mm | 45mm-60mm,could be customized | 1000pcs / carton |
| M10x190 | 8mm | 190mm | 45mm-60mm,could be customized | 1000pcs / carton |
Performance parameter of plastic insulation fixing anchor/anchor wall plug
According to the JG/T366-2012 standard;
Knocking anchor: Tap the expansion joint or expansion sleeve to squeeze the borehole wall to create an expansion anchor.
Claim:
1. The nominal diameter of the disk of the disc anchor should not be less than 60mm and the tolerance is 1.0mm. The nominal
diameter of the expansion sleeve should not be less than 8 mm with a tolerance of ±0.5 mm.
2. Standard value of anchorage capacity of anchor bolt: standard value of tensile load capacity of anchor bolt Fk≥0.60
3. Anchor bolt disc tensile force standard value: disc pullout standard value Frk≥0.50
First, we need to use electric drill to drill specific size of the hole
Second, putting expand plug in the hole
Finally, using a screwdriver to tighten screw into the expansion tube until the specified location
The arrangement of the external anchor wall plug. The number of anchors installed on the outer wall insulation system of the extruded board;
the average of 1-10 layers is 6/m2, the average of 11-20 layers is 7/m2, and the layers of 21-26 are 9/m2. Any single block with an area greater
than 0.1m2 must be anchored, depending on the shape and site conditions;
the density of the anchor should be increased around the angle of the sun, under the mouth, and around the edge of the hole.
The distance is not more than 300mm, from the edge of the base. Not less than 60mm