Huihao Hardware Mesh Product Limited
Huihao Hardware Mesh Product Limited- Admin@huihaomesh.com pattern design, frame design, color finished and installation parts Insulation pins- Fabric Lamianted glass- Mesh Drapery - Architectural
Add to Cart
Self Adhesive Insulation Hangers Pins Product Introduce :
Self-Adhering Hangers are designed to attach insulation to clean, dry, smooth, non-porous surfaces.
After the hanger is installed, the insulation is impaled over the spindle & secured with a self-locking
washer. Due to the nature of adhesives, it is important that the user read & follow the guidelines.
It is the responsibility of the user to determine the suitability of the intended application.
Material: Galvanized Steel (Standard) Available in Stainless Steel & Aluminum as special order Other
details: Standard Lengths are listed above Other lengths available as Special Order Packaging:
1,000 pcs/ctn up to 2-1/2" 500 pcs/ctn up to 8" Hangers are available packed with, or without washers
100 pc packaging also available Other diameters available as Special Order A complete line of Self-Locking
Washers in various styles and materials is available for use with Self-Adhering Insul-Hangers.
Specification of Self Adhesive Insulation Hangers Pins :
| self adhesive rock wool insulation pins | ||
| pin diameter | tape base | pin length |
| 12 ga (.106)/ 3mm | 50mm Square | 1 |
| 12 ga (.106)/ 3mm | 50mmSquare | 1-5/8 |
| 12 ga (.106)/ 3mm | 50mm Square | 2-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 3-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 4-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 5-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 6-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 8" |
| 12 ga (.106)/ 3mm | 50mm Square | 8-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 9-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 10-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 12" |
·Suitable for all kinds of wall
·High pull-off strength for a higher security of the system
·Low thermal conduction addition value to avoid thermal bridge
·Galvanized layer on the steel nail to protect the nail from alkali
Application: It is fixed on the position where there is significant wind-suction-force or if the height is
more than 20m or if the finishing coat is tile etc
WIPE SURFACE CLEAN.Anchor should be applied to a clean, dry non-porous surface
PEEL OFF RELEASE BACKING.NOTE: Double faced foam tape has a one-year active shelf life
STICK ANCHOR IN PLACE.Select location before contact with surface.Press firmly
APPLY FIRM PRESSURE.20 pounds of pressure should be applied all around the base of the anchor
ALLOW TO STAND 15-20 MINUTES.This will permit better adhesion to take place
INSTALL INSULATION AND SECURE WITH WASHER.Recommended load is 3 lbs. per anchor
(.75 lbs./sq. inch maximum)
self adhesive hanger and SELF-STICK ANCHORS from huihao company
500 or 1000 units per carton or plastic bag