Huihao Hardware Mesh Product Limited
Huihao Hardware Mesh Product Limited- Admin@huihaomesh.com pattern design, frame design, color finished and installation parts Insulation pins- Fabric Lamianted glass- Mesh Drapery - Architectural
Add to Cart
Material:Low carbon steel, Aluminum or stainless steel.
Plating pin: galvanized coating or copper plated
Plating base: galvanized coating,
Self-locking washer: Available in all kinds of sizes, shapes and materials
Base size 2"×2" /50mm square base
Pin size :12GA( 2.7mm) -3mm
Pins length:1" 1-5/8" 1-1/2" 3-1/2" 4-1/2" 5-1/2" 6-1/2" etc
Accept customization for other lengths
| Pin diameter | Base size | Pin length in common | Washer |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 1'' (25mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 1 1 / 2''(38mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 1 5 / 8'' (48mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 3 1 / 2 ‘’(89mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 4 1 / 2 ‘’(114mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 5 1 / 2 ‘’(140mm) | Available |
1, Clean the surface: Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2,Peel off backing:Remove the protective release paper taking care not to touch the adhesive.
3, stick pin in place: Place the hanger in the required position and press the base against the surface to be insulated
4 ,pressure the pin and wait 15-20 minutes,
5.Install insulation and secure with self locking washer
insulation hangers Application: It is fixed on the position where there is significant wind-suction-force or if the height is more than 20m or if the finishing coat is tile etc
