
Add to Cart
Material:Galvanized Steel, Aluminum, Stainless steel
Usage:Air Conditioner
Nail Length:25mm - 165mm (1" to 6 1/2")
Nail Diameter:Dia 2.7mm (12GA)
Base Size:50mmx50mm (2"X2")
Base Material Thickness:0.4mm
Lock Washer Size: all kinds of sizes and shapes.
Lock Washer Thickness:0.4mm
Specification:Designed for different rectangle air duct
Pin diameter | Base size | Pin length in common |
12Ga | 2'x'2'' | 25mm |
12 Ga | 2'x'2'' | 50mm |
12 Ga | 2'x'2'' | 63mm |
12 Ga | 2'x'2'' | 89mm |
12 Ga2 | 2'x'2'' | 102mm |
12 Ga | 2'x'2'' | 140mm |
12 Ga | 2'x'2'' | 200mm |
The length of the Self Adhesive Insulation Pins also could be customized .
Duct-lining
Ducts of air-conditioner
Glass-wooland rock-wool in soundproofing works
The pins could have washers together
1. Environmentally-friendly
2. Light, dust free, fire retardant and easy to install
3. Heat reflection, heat insulation, sound insulation, counter radiation, counter vibration and shielding
4. During Summer: moisture barrier, sun protection, waterproof, energy saving consumed by cool air conditioning
5. During Winter: heat protection, remarkable energy saving consumed by warm air conditioning
Best results are obtained when ambient temperature is above 40° F at the time of application. Remove the release paper from
the base plate and apply hanger to a suitable flat surface.
A firm straight, forward pressure should be used. Do not twist. Due to the quick-tack nature of the adhesive, it is very important
that the release paper not be removed until ready to apply the hanger.
Insulation may be applied immediately after properly securing the hanger. Hangers should be stored at 75° F and 50% relative
humidity. It is important that stock be rotated. Shelf life is estimated at 2 years if stored as recommended